The origin of the mill is understood by the presence of water in Pals, an old shallow bay, where floods from the overflow of the rivers Ter and Daró and storms from the sea were very common. Farmers, landowners and locals were constantly fighting to control floods and water levels. This gave rise to an irrigation system dating back to medieval times. In 1321, the trustees of Pals made deals with the king (Joan II king of Aragon) to demolish a mill, embankments and locks that were causing floods. They also made deals to dry the ponds to cultivate the land. 



In 1452 the mayor granted a license to Miquel Pere, the prothonotary of Ferran the Catholic, who already had a wheat mill, to build a rice mill and make a canal from the river Ter to the mill and another from the mill to the sea, reinforce with stones, sticks or reeds its exit to the sea, so that the sand didn’t cover its course and the boats could enter and leave without difficulties. The irrigation of the mill has a length of 12 km with a width of 12 meters and a flow of approximately 3.5 cubic meters per second. The irrigation system originates in the Canet lock and passes through the municipalities of Serra de Daró, Gualta, Fontanilles and Pals. The Molí irrigation canal was declared a cultural asset of local interest in 2005. Irrigation and water pipes form a complicated irrigation network. The Daró Vell, from the lock-gate of Mas Carles, is transformed into multiple arms and the three main ones are: the Molí de Pals irrigation canal, the riera Nova (a stream which comes from the lands of Peratallada) and the Restallador.



At the beginning of the 20th century, the working process of the mill was modernized and we found different documents indicating the budgets received for the acquisition of different machines. We are located in the alternator room, where electricity was produced thanks to the mechanical action generated by the Francis turbine installed together with a whole set of gears and transmission shaft to improve the performance of the mill. Here you can see the budget for the purchase of a Francis turbine, simple, without camera, with horizontal axis, dated October 4, 1919. It was a Siemens steel turbine. This turbine powered up for a time the shaft that directly fed the gears of the rice mill as well as the shaft that fed the alternator to generate electricity.



Additionally, at the same time that the Francis turbine was purchased, an alternator was acquired. In these documents, found in the municipal historical archive, you can see the budget dated August 8, 1919, of two machines, an A.E.G. type E.S.D, and a three-phase motor brand A.E.G. Berlin type, which is what was finally bought and installed in the mill. At the beginning of the century, the production of electrical energy was in private hands. It was not until 1944 that a national electricity company was created. Although we can not assure the exact date of start of use of all this machinery, we can say with certainty that at the beginning of the 20th century the mill was modernized with several machines.

On the other hand, the improvement of the production performance and the use of the canal's water, allowed considering the production of electricity for the consumption of individuals. This survey carried out by the owners of the mill to individuals from the surrounding farmhouses and which served to probe the volume of electricity that would need to be produced, is another evidence of this entire process of industrialization and modernization.



An hydraulic turbine is a rotatory mechanical device that extracts energy from a fluid flow, such as water, and converts it into useful work. The turbine transforms the energy of the movement of a fluid, into rotation mechanical energy. Energy can come from a waterfall or from the current itself. This rotational movement is transferred by a shaft that can directly move another machine or it can also be used for generating electrical power when combined with a generator. There are two types of turbine Impulse and reaction turbine

In this case, the water moves the impeller, not by the direct blow, but by the reaction caused by the exit of the water on the impeller. In this case, we are interested in having a large flow of water that pushes the water that enters the pipes so that it comes out with great force (pressure) and moves the impeller with more force. The height at which the water falls here is not very important because it does not hit the blades directly.



As can be seen in the drawing, the water is collected by an inlet pipe and distributed to various outlet points by the distributor. The points where the water comes out are called nozzles, which cause the water to push the blades of the impeller that rotates the turbine shaft, also called the rotor. The impeller consists mainly of a disc provided with a system of blades, buckets, shovels or spoons on which the water pushes. Water comes out from the waste pipe to the river or canal flow.



An alternator is a type of motor machine that converts mechanical energy to electrical energy in the form of alternating current, through a phenomenon known as electromagnetic induction which says that: “a conductor moving relative to a magnetic field develops an electromotive force in it”. Faraday's law is a basic law that predicts how a magnetic field will interact with an electric circuit to produce an electromotive force. For reasons of cost and simplicity, most alternators use a rotating magnetic field with a stationary armature.

The rotor, one of the parts of the alternator, is an electromagnet, which is usually driven by a turbine. The magnetic field rotates with the rotor at the same speed. The rotating magnetic flux from the rotor intersects the winding of the stator that is placed around the rotor. This generates an alternating electromotive force in the winding, and this generates an alternating current when connected to a consumption.



An alternator has the following three main parts: stator, rotor and the air gap.

Stator:  or inductor, is a stationary and external part of the machine and is made of very thin sheets of silicon steel. It is a cylindrical hollow piece that surrounds the rotor, which supports the different components that make up the machine. It is separated from the rotor by the air gap. It has a few pair of poles formed by a winding around a core of soft ferromagnetic material.

Rotor: is a rotary and cylindrical part of the machine assembled on a movable shaft. Located inside the stator, supported by bearings (to avoid friction as much as possible and, consequently, a reduction in mechanical performance).

The one used in hydro generators is the Salient Pole Type Rotor. The number of poles are about 6 to 40 so it is rotated with low speed. 

Air gap: it is the space that remains between the stator and the rotor, and allows the free rotation of the rotor.

Both the stator and the rotor contain electrical coils or circuits. So we can say that an alternator contains two electrical circuits linked by a magnetic circuit.